HWK güncellemeler

[civrilgsm]

eline saglık...

[turkcellgsm]

HWK Release 14/09/2008

HWK_Support_Suite_Setup_v02.08.000.exe
Release Date: 14/09/2008

The Official release is ready in our download area http://sarunasoftware.com.


Please follow the instructions careful on the above page.

The Update Client is launched after HWK Support Suite install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


UFS_DCTxBB5 v2.0.8.0
----------------------

1. New BB5 products:
RM-207,RM-235,RM-236,RM-257,RM-270,RM-277,RM-325,RM-328,RM-342,
RM-343,RM-345,RM-346,RM-352,RM-354,RM-355,RM-357,RM-358,RM-359,
RM-367,RM-378,RM-379,RM-386,RM-387,RM-396,RM-397,RM-400,RM-407,
RM-408,RM-409,RM-410,RM-411,RM-414,RM-416,RM-417,RM-418,RM-419,
RM-420,RM-422,RM-425,RM-436,RM-462
(6263,N78-1,N78-5,3555b,3555,3555c,6600f-1c6220c-1,N78-3,E66-1,E66-2,
E71-1,3600s,7610s,7610sb,E71-2,5610d-2,5610d-2b,6210s-1,7310cb,7310c,
6210s-5,6220c-5,6212c,6500c-5,6650d-1c,E71-3,6210s-1c,5320d-1,5220b,
5220,6600s-1c,5320,5320d-1b,5320,6210s-1b,E66-3,6124c-1,6122c,7210c,E71-5)
2. New DCT4 products:
RH-116,RH-117,RH-118,RM-391,RM-392,RM-393,RM-394,RM-395
(7070,7070b,1681c,2760h,2680s,2680s-2b,1680c-2,1680c-2b)
3. New DCT4+ UNL versions support:
1200 (RH-99 v5.51,v5.53), 1200b (RH-100 v5.32)
1208 (RH-105 v5.51,v5.53), 1208b (RH-106 v4.00,v4.11,v5.23,v5.32)
1650 (RM-305 v5.32,v5.51,v5.53)
1680c-2,1680c-2b (RM-394,RM-395 v5.61,v5.63)
2610,2610b (RH-86,RH-87 v6.73,v7.10)
2630 (RM-298 v5.61)
2760 (RM-258 v4.20,v5.61), 2760b (RM-259 v4.20,v5.61)
2760h (RM-391 v5.45)
4. Fixed minor bugs.
5. New Flash Update Pack 8.36.2.35145

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


LG_GSM V 2.0.8.0
-----------------

v 2.0.8.0 (HWK Required)
-------
1. Added "FSct0" (Force Sector 0 Overwrite) Checkbox in
Infineon platform.
Use it for Frozen or blinking phones (KE800,..)
2. KP130, KP210, KP215, KP260, KP265 support added.


SAMs V 2.0.8.0
---------------

TRIDENT
S730i (DUNL,IM,FL)added.
B200,B300 DUNL and IM fixed.
Reserved Regions values revised and fixed.
MSL Repair enhanced, and added for following products:
C17x,C26x,C520,E84x,E90x,E95x,F21x,M300,M60x,P520, U10x,U30x,X82x
"Erase NOR" activated.
Enhanced 4CC protocol handler (fixed error on PC busy)
TRIDENT VISION
E21x,J60x fixed (INF,DUNL,IM)
M310 added (FL,CUNL)
Enhanced 4CC protocol handler (fixed error on PC busy)
OM(SYSOL)
A117,C288,M130L added (DUNL,IM,FL,SECT)
E746 bug fixed.
SWIFT
D780,D788(Duos2),D828E,E251,E251C,E258D,F110,G808E ,J210,L310,
P180,P200,P260,P850,P858,T309,T509,U908E,X700N (DUNL,FL,SECT)
F488E,J150 (FL,CUNL) Use 'Unlock E2P' to see Codes.
E35x,E37x,T809 DUNL, SECT and IM fixed.
E480,E488 bug in DUNL,SECT fixed.
D880-Duos flashing bug in 2.0.7.2 fixed.
X700 SECT fixed.
SWIFT-AEROFONE
B130 introduced(FL,CUNL) Use 'Unlock E2P' to see Codes.
QUALCOMM
A411,A412,A701,A706,A707,A711,A717,A727,A736,A737, A801,A817,
F330,F338,F400,F408,F480,F488,F490,F510,F550,F700, G400,G800,
G800B,G800L,G808,J200,J200L,J208,J630,J638,L170,L7 60,L760G,
L768,L810,L811,P910,P920,P940,P950,P960,T639,T819, U700,U700B,
U708,U800,U800F,U900,U900U,U908,V705,V706,V707,V70 8,Z150,Z170,
Z230,Z238,Z240,Z240E,Z248,Z310,Z360,Z368,Z400,Z540 ,Z548,Z560,
Z570,Z720,Z728,Z740,ZV40,ZV50,ZV60 introduced (FL,INF,REUL)
COMMON
Product Langpacks description added (Info and MCU-Open)
Note, real menu languages can differ from listed here,
for different models, firmware versions. Languages in
brackets is not mandatory for current Region.


SeDBx v2.0.8.0
---------------

DB2010
1. Added Support for: 36Brown, 49Brown
DB2012
1. Added Support for: 50Brown, 51Brown, 51Red, 53Red.
2. Added CID Upgrade.
DB2020
1. Added Support for: 49Brown.
2. Loaders Updated.
PNX5230
1. Added Support for: 49Brown, 52Brown.
2. Loaders Updated.

USB Drivers are installed to X:\Program Files\SarasSoft\UFS\UFS_DBX\USBFlashDriver

SeDBx Quick Guide has been updated.


Many thanks to all those who have supported us!!!

[karizmaugur1]

HERE IS HWK_Support_Suite_Setup_v02.08.000

http://rapidshare.com/files/145388514/HW...08.000.exe.html


AND HERE IS HWK_Support_Suite_Setup_v02.08.000
http://rapidshare.com/files/145389666/HW...08.000.exe.html

[KAFKASYALI]

UFS_Suite_Setup_v03.01.000
UFS_Suite_Setup_v03.02.000
UFS_Suite_Setup_v03.04.002

HWK_Support_Suite_Setup_v02.06.000
HWK_Suite_Setup_v02.06.000

HWK_Support_Suite_Setup_v02.07.000
HWK_Suite_Setup_v02.07.00
HWK_Suite_Minor_v02.07.001
HWK_Suite_Minor_v02.07.002

HWK_Support_Suite_Setup_v02.08.000
HWK_Setup_Suite_v02.08.000

[ozerhospital]

hwk yenı updade cıktımı beyler 2.8 den sonra

makına karsı tarafından kapatıldı dıyor

sorun ne olabilir sizce

[cominic]

kardeşler pc çökmüştü ufs yi yeniden kurdum fakat hwk yı kuramıyorum sildim tekrar kurdum durum aynı başka bir tane setap var mı birde bende hwk orj. değil

[turkcellgsm]

cominic´isimli üyeden Alıntı

kardeşler pc çökmüştü ufs yi yeniden kurdum fakat hwk yı kuramıyorum sildim tekrar kurdum durum aynı başka bir tane setap var mı birde bende hwk orj. değil

http://www.sevgigsm.net/forum/showpo...6&postcount=14

3.01 i kullan yada 3.02 veya 3.03

hwk yoksa orjinal suiteleri kursanda çalışmaz

[turkcellgsm]

HWK Release 14/01/2009

Release Date: 14/01/2009

The Official release is ready in our download area http://sarunasoftware.com.


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


UFS_DCTxBB5 v2.0.8.0a
-----------------------

1. Flash Fix added to installer


Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


SAMs V 2.0.8.1
---------------

TRIDENT
CC01,P258,U600G added (DUNL,IM,FL)
TRIDENT VISION
B220,B310,B320,B518,B520,B528,J600G,J610,J618,M318 ,M620,M628
added (CUNL,FL)
L320 added (DUNL,IM,FL)
(Use [Reset MMI] if phone ask for password)
OM(SYSOL)
B110 added (DUNL,IM,FL,SECT)
SWIFT
D618,D980,E2510,F250L,F268,F278,G600G,G618,J770,J8 08E,L258,M150,
M200,M3200,M3510,S3600,T429,U708E,U808E added(DUNL,IM,FL,SECT)
D780,D788,D880,D888,D980 SLAVE support added (DUNL,IM,SECT)
J150 fixed (DUNL,IM,SECT)
IM Rebuild added and RAW TFS Read fixed for these models:
D618,D780,D788,D880,D888,D900i,D908i,D980,E200,E20 8,E250,
E250D,E250V,E256,E258,E258D,E251,E251C,E480,E488,E 590,E598,
E740,E747,E830,E838,E2510,F110,F250,F250L,F258,F26 8,F278,G600,
G608,G808E,G618,J150,J210,J700,J708,J770,J808E,L25 8,L310,L600,
L608,M150,M200,M610,M618,M3200,M3510,P180,P260,S36 00,T429,U708E,
U808E,U908E (Need power up phone with battery after IM done !)
SWIFT-AEROFONE
B130,B130S,B130T added (DUNL,IM,FL,SECT)
SWIFT-3G
B2700,J800,L700,L708 introduced (DUNL,FL,SECT,BT)
SKYWORKS
C100 - 'Not Released Yet' bug fixed.
QUALCOMM
F480G,F480H,M7500,M8800,S7330,U900F,U900G,U900K added(FL,INF,REUL)
Added QualComm mode support:
(*#QUAUSB# to enter QualComm mode, QC Debug Interface on USB)
(*#SAMUSB# to enter Samsung mode, QC Debug Interface on RJ45)
QCDI Info, NVM Read, RAM Read added.
UNLOCK and UNFREEZE introduced for these models:
F480x,L760x,U900x,Z240 (Use [QCDI Info] button to readout keys)
COMMON
Stop button added.
User interface localisation.


Update Client V 2.0.8.1
----------------------

Fixed Exception errors on req-fbi process

!!!THERE IS NO NEED TO UPDATE YOUR HWK SINCE 2080 RELEASE IF ITS WORKING OK !!!


We would like for some users to add localisation in their own native language to the software, localisation is added to SAMs only at the moment but will be added to other modules in future.

Conditions:-

1. Only 1 contributer per language.
2. You must know how to use the software and what each function does.
3. The chosen language is your native language or you are fluent in the selected language, for example Chinese is not my native language and I would like someone to take over from me and finish/correct as required.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk
www.gsm-solutions.co.uk

[ugurgur]

02.08.00 sürümünün eki bugün çıktı güle güle kullanın.


RapidShare: Easy Filehosting

[ihakan]

ugurgur´isimli üyeden Alıntı

02.08.00 sürümünün eki bugün çıktı güle güle kullanın.


RapidShare: Easy Filehosting

emeğine sağlık ustam