CycloneBox güncellemeler

[halis]

CYCLONE 106 exe
http://rapidshare.com/files/37915972...xInstaller.exe

[turkcellgsm]

Hello, New update for Cyclone Box is Ready.

What is new?
- Blackberry Module added, support all latest 210 MEPs. Unlock is free, and uses server to calculate Unlock Codes.
- If Logger fails somehow, you might still use manual mode (if you know IMEI and MEP)
- All DCT4 RPLs are free now (Included ASICs: 2,5,6,7,11)
- Skin changed back to white one (too many users complained)
- Improved mode transition between Main/Boot (timeout increased)
- Fixed problem when upon adding "New Path" in "Paths" module Root directory was empty
- CBUS stack improved, if box is disconeected during work, it tries to connect it again instead of "CBUS ERROR"
- Minor changes and bugfixes

How it works?
1. Run Blackberry Module
2. Install drivers (skip this if done already)
3. Click "Read Phone"
4. Connect phone to computer
5. Unlock using calculated codes

Here is example BB8310 Unlocked by Cyclone:

Quote:
Waiting for new Blackberry USB Device (timeout 30 seconds)...
New device attached, checking if it's Blackberry...
Blackberry Found!
PIN: 208B60F9
Opened Channel "RIM CalTask", Proceeding...
IMEI: 358516020462712
HWV-16835-001-1
ASY-15714-005
MEP-06424-002
VSM-17713-001
CFG-10695-065
SFI-15771-033
APP-21301-001
Calculating Codes using Fetched Data...
Handling device: [Cyclone Team], [Cyclone Box]
Service Tag: 6F1079DB8ADD083018BB1FB147B8DEE6
Cyclone Server (1.0.0.59, Cyclone Box Team 2008, 2009, 2010 - Ready.

Please wait...
Codes received: 1
MEP-2 Code: 4910403860764705
All Done!
Where to download?
RapidShare: 1-CLICK Web hosting - Easy Filehosting

Please do not forget also to install Blackberry drivers! You can download latest drivers from here:
RapidShare: 1-CLICK Web hosting - Easy Filehosting

[halis]

08-06-2010 Cyclone Box Firmware v01.38 Released Hi,

v01.38 Nokia Firmware is uploaded to server.
Changes:
- Fixed problem when Nokia correct BB5 NCKs was calculated only for levels +1,+2,+3, codes +4,+5,+6,+7 was wrongly calculated due to memory leak of calculation routines.
- Minor (or non enveloped yet ) changes and bugfixes

This is server-side update only, don't ask for "exe" file because new "exe" is not released at moment, just use Maintenance Tool and upgrade your box.

Every box have 3 tries of upgrading firmware, please be patient during upgrade process because it may take some time and if you will cancel it (When software will act as a "hangup") you will lose upgrade logs and will need ask us for adding another credits...

Best Regards,
Cyclone Team

RapidShare: 1-CLICK Web hosting - Easy Filehosting

[norepent]

Hi to all
New Cyclone Box Installer, Firmware, Bootloader, is ready!
Most important changes:

=====================
Installer v1.07
30.06.2010
=====================
- New FBUS Loaders v10.18.00 introduced (new protocol, for RAPIDO,RAPU,ST,etc)
- New FBUS Lodaers v10.16.00 introduced (old protocol, for RAPv3)
- Added support for Infineon X-Gold phones flashing. Phones supported: 1661 RH-111, RH-125, etc.
- XGold: Support for dead phones flashing
- XGold: Support for cross flash (we have tested 1616 flashing with 1800 firmware and seems works. Anyway YOU are responsible for any damages. Make sure PM is being backed-up before cross-flash. You also can't flash phones with difrent platform (i.e. RH111 <> RH125). Too diffrent CPU, LCD...,etc...)
- XGold: Supports bauds 115200,230400,460800,921600
- XGold: You don't need to know which phone is UPP or Infineon based. Just select model and Cyclone will detect it automaticly - wil select corect falshing method.
- XGold: Supports for changing phone PPM/CNT or/and MCU
- XGold: Support for latest 2010 PBL/EBL Loaders
- Added "Flash Language Only" checkbox for DCT4/XGold mobiles. Use only if MCU version installed in phone matches PPM/CNT version which going to be flashed.
- Cyclone Clip Diagnostic module added. This is used for testing additional Cyclone Hardware (Clip).
- Clip Module Added into Main Firmware. This is used only with "Cyclone Clip" hardware. Clip Features:
- Clip: Can unlock any DCT4+ phone within 2 secs (without PC)
- Clip: Can repair Contact Service (if caused by damaged simlock)
- Clip: Can Rebuild Simlock Area
- Clip: Can reset security code of most DCT4/BB5 phones
- Clip: Can reset security code bad attempts counter of most DCT4/BB5 phones
- Clip: 100% Safe, fast and easy to use
- You need have Clip Hardware to use Clip Funcionality. Clip is very simple hardware attached together with batery to Diagnostic Port (and box could be used as clip without PC). We will update clip later for other funcionality.
- New Secure Bootloader Agent v3.00 Released
- Added Dead Boot Recovery mode (in case to do "Boot Recovery" (just in case) smartcard MUST be removed to launch Recovery Mode!)
- New Secure Bootloader v2.12 have been released
- Bootloader: Added Clip Detection
- Bootloader: Fixed floating (blinking) "VBAT" port
- Bootloader: Added support for some new types of smartcard
- Bootloader: Improved startup time
- Bootloader: Improved security
- Bootloader: Minor changes and bugfixes
- Added new messages to NCK Phone Respond parsing (added "Too fast between tries" and "Not locked on given locklevel")
- The +4/5/6/7 BB5 NCK passwords are now calculated correctly (memory leak during code calculation)
- Message "This will consume XX credits" removed while taking DCT4 RPL as long as they are free .
- Blackberry IMEI Check fixed
- Added "Skip CMT ID Check" for some BB5 phones (if you are trying to flash alien files or NMP made some mistake during building FIASCO images)
- Added Warning confirmation before Writing Alien SD Keys
- Error while RSA unlocking DCT4 phones fixed (Error 0x02). Error have occured when used bad cable.
- Main Firmware v01.41 Released
- Box HW Rev A11E Added
- Minor changes and bugfixes

How to run "Clip Mode"?
1. Attach Clip Adapter to box "Diagnostic Port"
2. Connect Clip Adapter "USB" cable to box USB Input
3. Connect 9V battery to Clip Adapter
4. Connect phone to "Service Port"

How to use "Clip Mode"?
Once Clip Mode is run, you need use S1 Button to change it's mode.
Default clip mode is:
RED (slowly blinking) - read phone info via FBUS
other modes you can select pressing S1 button:
GREEN - Unlock/Repair simlock
BLUE - reset securitycode/sec.code attempts

Once correct mode is assigned, you need push S2 button. Needed action will be taken, and GREEEN (success) or RED(failed) led will blink fast afterall. Clip will be ready to service next phone/select other mode/etc.


bence yeni güncellemede dikkat çekiciler xgold'un eklenmesi ve clip teknolojisi. clip2in ne olduğunu merak ediyorsanız birde video hazırlamışlar. http://www.youtube.com/watch?v=zDkUstxsujY

güncellemeyi ise http://rapidshare.com/files/40431702...aller.exe.html.

clip donanımını da resellerden 15 dolara alabileceğimizi belirtmişler. sanırım Bestcool ustayı kastetmişler :D

[turkcellgsm]

New Cyclone Installer,Firmware,Loaders are avaiable.

What's new?
=====================
Installer v1.08
06.07.2010
=====================
- Added new Nokia FBUS Loaders for Old and New protocols (v10.20.0)
- Fixed problems with flashing RAPIDO based phones with hash 479.... (N86,X6). Was Nokia fault (10.18.0 loader pack was broken, probably problem with RSA signature so loader wasn't spawned at all...)
- Fixed problem with FUR initialization when dealing with v10 (2010) Nokia Loaders (Affected was new protocol phones)
- Forced users to install v1.08 changing few firmware routines - some users upgraded their boxes updating it for "v10" loaders, but they didn't installed new installer - their BB5 flashing was broken then. Forcing users to install v1.08 and upgrade box is just to ensure every user will have 100% working environment (latest loaders, latest firmware, latest exe).
- New Box Firmware v1.45 Released
- Handling some smartcards in main firmware fixed
- Minor changes and bugfixes

Where to download?
RapidShare: 1-CLICK Web hosting - Easy Filehosting

Don't forget to upgrade your box firmware to v01.45 !

[turkcellgsm]

Cyclone Box Installer v1.09 Released, SL3 Unlocking Added, New FBUS Loaders, and more

Hi!
New update for Cyclone Box is Ready.

What's new?

Code:
=====================
Installer v1.09
02.08.2010
=====================
- New BB5 Loaders v10.22.00 Introduced
- SL3 Unlocking added, uses server and credits, supported models:

- 2700 Classic (RM-561)
- 2730 Classic (RM-57
- 2730c-1b (RM-579)
- 2690c (RM-635)
- 3600 Slide (RM-352) v56.26 – v57.23
- 3720 Classic (RM-51
- 5130 XpressMusic (RM-495)
- 5310 XpressMusic (RM-303) v58.58 – v59.42
- 5730s (RM-465)
- 6300 (RM-217) v57.20
- 6303 Classic (RM-443)
- 6500 Slide (RM-240) v59.60
- 6500 Classic (RM-265) v59.45
- N97 (RM-505/506/507)
- N97 mini (RM-555)

- When using New Protocol flashing, software reminds about correct TX2 cable and yellow adapter
- Added Manual Mode to retrieve SL3 NCK if you dont have phone in hand (just enter IMEI when asked)
- Added "Erase NCK Codes" - this should be used when phones needs to be factory-relocked (best to use with SL3 if you want to clear entered NCK codes). Work with SL2 too. Simlock area is untouched when Relocking to factory state, and warranty will still be ok. Seems first software on market with such funcionality.
- Fixed BlackBerry calculation problems, old version never closed TCP connection after success or non-success calculation
- Firmware v1.46 Released, Added SL3 Routines
- Minor changes and bugfixes
Example SL3 unlocked by new update

Code:
BB5 Unlock Started...
MCU Version V 07.95
MCU Date 03-02-10
Product RM-495
Manufacturer (c) Nokia
IMEI 351538045311523
Mastercode 4612735731
Simlock Server SIMLOCK SERVER
Simlock Key 2600300000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 26003F
Connecting to Cyclone Server...
Cyclone Server (1.0.0.632), Cyclone Box Team 2008, 2009, 2010 - Ready.
Checking job status...
Code Ready, Code: #pw+966057384237461+7#
Sending code via FBUS...
NCK[7] - ACCEPTED
Code Accepted! Unlocking Finished!
Where from download?
RapidShare: 1-CLICK Web hosting - Easy Filehosting

A firmware upgrade to v1.46 is needed to use this update!

[turkcellgsm]

Cyclone DREAM Released! FBUS2USB, TurboCache, Infineon XGold ****, Loaders & more

CYCLONE TEAM



proudly presents
Cyclone Box Installer v1.10

What's new?

Quote:
- First in the world - Infineon XGold **** Backup/Restore added
- New BB5 FBUS/USB Loaders v10.34.1 introduced
- BB5 USB Flashing module rewritten, supports new Flashing Type: FUR USB - using FBUS loaders on USB. Is possible now to do also RPL write, Cert's read/write/erase, using just USB cable. Full FBUS protocol emulation over USB supported!
- FBUS2USB RAPU Support
- FBUS2USB RAP4 Support
- FBUS2USB Broadcomm Support
- Broadcomm platform flashing added (Nokia X2,....)
- 6700,E52 and other RAPunistore Booting fixed (Wrong First Char Received)
- SL3 Simlock RPL Write Introduced
- DCT4/BB5 Flash TurboCache added, increasing flashing speed a bit
- The Profile Bits is now analyzed before SL3 Unlock (it will not submit job if phone have blocked NCK unlocking - i.e. Telcel Mexico units)
- New NCK unlocking method for SL2 phones introduced (with latest MCU SW versions)
- Added Autologging (operation logs are stored in StoredFiles)
- Added USB Full RPL Backup (NPC,CCC,HWC,Simlock,WMDRM,etc)
- Added StatusBar in Nokia Tool, displaying current Task/Mobile attached
- DCC Camera Repair added for module NI00BC0000030102F201
- DCC Camera Repair added for module ISL3TI0200000C000002
- DCC Camera Repair added for module IS00TI0200000C208A03
- DCC Camera Repair added for module IS00TI02000001022B04
- DCC Camera Repair added for module 86000300010401022B04
- DCC Camera Repair added for module 8600030001040C208A03
- DCC Camera Repair added for module 86L10300010406260004
- DCC Camera Repair added for module 86L10300010406260000
- DCC Camera Repair added for module 86L103000104094C1003
- Refactorized GUI thread problems
- Improved stability of Blackberry calculator
- Improved flashing speed with Skins Enabled
- Added detailed Action Statusbar
- Added CBUS StatusBar, indicates "---->" on USB Transmit, "<----" on USB Receive, Idle and Errors
- Support area is rebuilt - file list parsing is optimized
- "Connection Closed Gracefully" in Support Area fixed
- Connection recovery in SupportArea added
- Fixed "Floating Point Divison by zero" in Support Area
- Entered NCK codes are now backed-up too upon Simlock Backup
- New progressbar introduced in Nokia Tool gui
- Improved USB SwitchToRaw
- Improved ADL Server Pooling
- Improved USB Phone Pooling
- USB BootRom detect routine rebuilt
- Fixed "Access Violation" while application exit
- Fixed Registration Tool bug when "Submit" button is not shown after Box Prepare
- Fixed bug when software after minimizing to tray don't appears at taskbar
- Added "KB Left", "Time Left", "Current Speed" real-time information while downloading files from support
- The Germany Server is now default Support Server
- Added support for Box HW Revisions B, thus is A11F, B110, B111 and B112, and other B11x
- Old "INI" File Parser Module added (for Old DCT4 phones)
- Old "INI" File parser Module added (for Old BB5 phones)
- Added support for 6630,6680,N70 ini parser (DPConverted v1-v2 VPL files)
- The product name is now resolved at Product List (i.e. RM-1 (6630))
- Auto-select flashfiles added (selects product and variants on Read Phone)
- The new method of BB5 NCK Calculation is now the default Unlock Method for BB5 mobiles. For SL3 use SL3 Online Code Calculation.
- "Abort" button added, this terminating all threads (during flash, erase, unlock, whatever)
- Skin Manager updated to v7.02, much stable and faster
- Fixed box hangup problem when PC goes to sleep mode
- During SL3 Check/Submit job, phone is readen first, then server transaction starts (to not overload server resources)
- Failed to Process Initial Challenge (2) during Bootloader Upgrade fixed
- During SL3 Submit Job software now try first to read PM 120 and detect if phone is SL3
- Small changes regarding SL3 Submit Job - should work bit smoother right now with bad cables
- Updated message about SL3 Credit consumption
- Added bigger delay between entering NCK codes (bruteforce protection)
- Fixed "Canvas does not allow drawing" while SL3 Manual Mode
- Cyclone Secure Bootloader v2.13 Released
- Cyclone Main Firmware v01.49 Released
- Cyclone Calculator v1.00 added into installer
- Cyclone USB Drivers Updated to 1.0.0.5
- Connectivity Cable drivers updated to 7.1.34.0
- Minor changes and bugfixes
How to update?
1. Uninstall old installer
2. Download new installer
3. Install it
4. Upgrade box firmware
5. Enjoy

Where from download?
http://www.karwos.hk/CycloneBoxInstaller.exe

Thanks for all who support us! Thx Moulnisky, PTT, Honey, arash, & others...

[norepent]

son update gayet iyi olmuş

[turkcellgsm]

Hi,

Small manual how-it-works:

1. Read SL3 Log file (BB5, Simlock Tabs, Group "Local SL3 Bruteforce", Button Read LOG File)
2. Save the readen Log File somewhere. It contains necessary informations needed to calculate code.
3. Use "log2cod Calculator" to calculate COD file. Processing speed depends on GPU installed at your PC. log2cod calculator supports calculation resume (on power-off fail, etc).
4. Once COD file is ready, use "Send COD File to Server" button to Submit Calculation Result to our server for further processing
5. You can unlock your phone now as it would be unlocked by our servers (Select SL3 Online RPL Calculation method, and press Direct Unlock), you may also use Manual Mode if phone is away.

Download Link: http://www.karwos.hk/CycloneSL3_Standalone.rar

PS. yes, no need to pay for USELESS MX Credits!!

[turkcellgsm]

Cyclone SL3 FREE and UNLIMITED RELEASED

Let's come again:

Small manual how-it-works:

1. Read SL3 Log file (BB5, Simlock Tabs, Group "Local SL3 Bruteforce", Button Read LOG File)
2. Save the readen Log File somewhere. It contains necessary information needed to calculate code.
3. Use "log2cod Calculator" to calculate COD file. Processing speed depends on GPU installed at your PC. log2cod calculator supports calculation resume (on power-off fail, etc).
4. Once COD file is ready, use "Send COD File to Server" button to Submit Calculation Result to our server for further processing
5. You can unlock your phone now as it would be unlocked by our servers (Select SL3 Online RPL Calculation method, and press Direct Unlock), you may also use Manual Mode if phone is away.

Note1. No, this will not work with Mobile GPU (ati mobility, nvidia m... , )
Note2. You need special GPU (or 2xgpu in crossfire), check here (more sha1 perf points - better speed) GPU estimations
Note3. Reading log, calculating process is standalone. After calculating COD file, it needs be submitted to server (for calculating level1-level7 codes), its immediatly and free ofcourse...
Note4. We tested on both gpu:
- 2xHD5970 and searching 1 possiblity is ~22 seconds (total 220000 seconds - worst case - ~61 hours).
- Old Nvidia GT8800 GPU ( i think it have about 4 years now ), searching 1 possibilty is ~660 seconds (total 6600000 seconds, thus worst case is ~1833 hours (76 days))
Note5. I got "Too many child process failure" message. That means your GPU is unsupported, or is too weak.. OR some problem really occured.
Note6. We aren't disabling our servers, since this solution will suit only for some (5%) of ppls, and needs investment in HW (with invested 2500€, can make 10-12 SL3 phones per month).

Download Link: http://www.karwos.hk/CycloneSL3_Standalone.rar